This mount allow to fix the PSU of your microcube inside the printer structure.

STL files are for a PSU of 170x85x40mm (I'm using this one).
But source file (power_supply_holder.scad) is provided if you want to ajust it to different PSU sizes.

There is two STL provided for front holder: one for basic microcube, and another one ("narrow") compatible with a second z axis on the front side of the printer.

Instructions:

• Print a rear holder and front holder
• Clip them in the microcube structure
• Fix the holders with zip ties.
• Put the PSU
• Block the PSU using two zip ties on the bottom of each holder