This is a remake of Dimwit-Dave's Raspberry Pi Zero WiFi Camera Case I really like how small a case he packed the Pi and camera into but, I have a Pi Zero W and a V2 Camera and the mounting holes for the camera or the board didn't line up correctly for me so I copied his awesome design and made it fit my Pi and Camera.

I'm only using this with MotionEyeOS so ~Case.stl just has a cut out for power... while ~Case 2.stl has cutout for the other two plugs.

*** Note - This will not work with the short 40mm camera cable. ***

**4/19/18 - ** On request I added a few new STL's that "should be able to be used with this Modular Mounting System

Pi Zero Case Arm Mount.STL is a whole new case that should mount right up. Pi Zero Case Cover Arm.STL and Pi Zero Arm.STL can be super glued together and mounted that way.

Keep in mind.... I have not tried printing either of these new pieces myself.

6-4-18 = Fixed the Pi_Zero_Case_Arm_Mount.STL to have the cutout for the nut retainer on the covers (so any of the covers should fit now.)