A remodel of TBSkinner's piNES. I didn't like how the usb outlets were facing back and the power cable facing forward, so i switched them around, since I'll be using it to emulate, now i can have the controller facing me and the power in the back.

Unfortunately with this edit I had to block the RCA video output and the AUX output, but if you're using HDMI to connect to a monitor, then you're fine. But if somebody really wants, I can try to rearrange it to have access to them.

In this edit, I also added a lid with the NES logo imprinted into it. I took a small paintbrush and filled the imprint with red paint to make it more like the original.

EDIT: I'm posting this a second time because after MANY failed prints and mistakes I've remade a few files, and fixed the .thing files so that the parts are in the best possible position for printing.

As mentioned in the info, I printed and failed many times, these instructions are what i found worked best.

Print everything with two shells at .1mm (.15mm should also work) and at least 10% infill. Print all the parts in the position they are in, if you want to compile multiple parts into one .x3g file, go right ahead, but be sure to keep them in the positions they're in. Print everything with a raft.

Print the Front black, Bottom shell, and Top shell with supports.