*** This is no longer a work in progress!!! I have printed and assembled my one and everything is perfect***

This is a mini or bar-top Arcade cabinet designed to house a Raspberry Pi 2/3, i-Pac Keyboard emulator, and 7" LED Display along with 8 buttons and a Joystick. The i-Pac module allows for shifting buttons giving you up to 20 button inputs more than enough to control all functions of RetroPIE for which I have based the design around.

You will need a medium to largish printer I have designed this to be printed on a Prusa i3 mk2 210x250 bed size

no supports are required with the exception of the Control panel which will benefit from supports (optional).

Some electronics and soldering skills may be required.

###Shop around you will be able to get these parts from all over the web local to you I have provided links only as a general guide###

###List of Materials###

• 1x Sanwa or Sanwa Clone joystick
• 8x Arcade push buttons https://goo.gl/fL81K2 you could purchase a kit with all the hook up wire and terminals already crimped.
• Hook up wire in various colours (at least 12)
• Female spade terminalshttps://goo.gl/8Il1GN
• Molex style plugs https://goo.gl/e75svy and https://goo.gl/KoLUpz
• 2x 3"(75mm) 4ohm 3w speakers https://goo.gl/KOmDaO
• 1 x 2x3w audio amplifier https://goo.gl/ZUmMzv
• 1 x 3.5mm audio jack https://goo.gl/3yqrjJ
• 1 x Raspberry Pi 2 or 3 https://goo.gl/XBFuha
• 1 x i-Pac keyboard encoder https://goo.gl/hWCHcr
• 1 x 7" display https://goo.gl/B482xT
• 1 x 270degree HDMI adaptor https://goo.gl/Deps5I
• 1x Short right angled micro to type A USB cable https://goo.gl/Ha02wr
• 1x short Type A to type B USB cable https://goo.gl/HLF4S8
• 1x VERY GOOD QUALITY long (1m) Micro USB to type A USB cable
• 1x Micro SD card configured with a RetroPie Setup

###Screws:###

• 30x Conter-sunk hex M3x12mm
• 15x Socket-head M4x20mm
• 12x M3x4mm machine screws
• 8x M3 hex nuts

###Tools:###

• Cordless drill and 4mm drill bit
• Philips head screw driver
• 2mm and 3mm hex keys
• Wire stripers
• Terminal crimping tool (optional you could just use pliers)
• Soldering iron and solder

###Misc.###

• cable ties
• Heat shrink