This is the first part of a "Järvsöskåp" a swedish lockers derived from a county called Hälsingland in Sweden. These lockers got a long history in sweden and some of these lockers can be hundreds of years old!

This is the lower part of the lockers. I have yet to finish the upperpart or the door to the lower part since im exhausted after a 15 hour nonstop run making the lowerpart. I'm satisfied with the result.

I might do some more "polishing" on it later.

This is the first 3d print i have spent a devoted time on. Still learning. Still going strong.

EDIT: I added the door, a lock mechanism and a key 2017-03-12(year-month-day).

EDIT: I remodeled the door, made it bigger, i made the lock seperate and bigger. So glue is required. Bigger hinges for glueing. New key. 2017-03-13

**EDIT: I remodeled the door once again. I kept the original size but i made the hinges seperate and bigger, i also added small glue slots at the side of the door in which where to attach the hinges. I also focused on simply making holes in the doors, where a piece of a metalclip have to suffice as a lock mechanism since it was a nuisance trying to design locks. The upperpart is finished :D!

To the upperpart there is 2 boxes and hinges that needs to be glued to the door and the lockers. 2017-03-30(Year-Month-Day). **