Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Modelo 3D Word-Clock german por xSnowHeadx no Thingiverse

Descrição

This is a fully printable case for a word-clock. It is designed for use of LED stripes WS281x with 60 LED/m. Additional there are needed only a RaspberryPi, a 5V power-supply, some wires and the software from here: https://github.com/xSnowHeadx/word-clock If using an additional USB-soundcard the device can be used as spectrum-analyzer too (see third picture).

Edit 2017/02/28: wordclock_case_half.stl updated

Edit 2018/08/15: now the cheaper ESP8266 can be used instead the expensive RaspberryPi. A first try of the software is available here: https://github.com/xSnowHeadx/WordClock_ESP8266. There are (at the moment) no audio-functions supportet. I also designed a fitting case for the ESP8266: https://www.thingiverse.com/thing:2842012

Thingiverse

Word-Clock german

xSnowHeadx

Curtidas

Downloads

Coleções

Impressões

Licença Creative Commons - Attribution - Non-Commercial

Arquivos (12)

wordcklock_case.stl 216.8 KB

wordclock-case_half.stl 116.5 KB

wordclock_shade.stl 1.1 MB

wordclock_shade_plate.stl 684 B

wordclock_shade_full_normal.stl 1.1 MB

wordclock_shade_full_normal_upper_half.stl 614.7 KB

wordclock_shade_full_normal_lower_half.stl 479.1 KB

wordclock_shade_full_mirror.stl 1.1 MB

wordclock_shade_full_mirror_upper_half.stl 618.6 KB

wordclock_shade_full_mirror_lower_half.stl 482.3 KB

wordclock-upper-grid_half.stl 63.8 KB

wordclock-bottom-grid_half.stl 123.1 KB

Ver no Thingiverse

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta

Comparar agora