Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
The base and clamp were design for USB microscope with a 33mm diameter and a 11" Articulating Magic Arm purchased from ebay. The camera I have was purchased from Maplins but widely available ebay.
The base was designed for a M6 with hex pattern underneath, I found this unnecessary after printing as the M6 bolt on the arm self taps into the base.
80
Curtidas
0
Downloads
82
Coleções
Tags
camera holder
usb microscope
Licença
Creative Commons - Attribution - Non-Commercial