Someone at work asked me to do a phone holder in the style of Darth Vader, this is what i came up with.

It's height is 200mm, i made it for the iPhone 7 (need to test print this when i have time to check sizes are correct). due to its size i have removed his head and would need gluing back on.

The plinth is added for stability for the phone and has the words " you will join the dark side" my suggestion is line the phone up mark the base and then glue the feet to it.

*updated altered helmet to make it more head shaped and created hole so the new post would line it up better..also filled in a few holes that strangely appeared in it. changed the plinth slightly as it separated when i printed it (not good after 10hrs) also changed the depth to make the base slightly thinner.

you will need supports for the arms. no supports for the plinth.

cura shows Darth around 30hrs to print @ 0.2mm. (you can separate the head and print it all by itself (i have done this in cura). and the plinth around 16 also at 0.2mm.

have fun.

the mask came from here... http://www.thingiverse.com/thing:1783

some of the body parts came from here.. http://www.thingiverse.com/thing:1642699

as always made in tinkercad