This is an offset mount for the Tevo Tarantula, designed to offset the MKS controller to the right and out in front of the X axis motor.

My motivation for moving the MKS to the side was so I could attach a decent sized diagonal brace to support the right z axis.

Tips if you are a Tarantula owner: To make this fit nicely I took the MKS perspex control box 'case' apart and inserted all the board-support screws from the back. I also remove the split washers from the M4 bolts that originally held the case to the z axis so I could get enough length to make them fit through the original 2 layers of perspex plus the mount and into the t-nuts. Hopefully the photos give some indication of what I mean.