Original Design: http://www.thingiverse.com/thing:1546607 Jpete24's Version: http://www.thingiverse.com/thing:1769656

A remix of Jpete24's "Plus" version of the PiGRRL Zero. Printed with ABS

-Independent action buttons -Railing on the case so the buttons don't spin, if you want to label them A,B,X,Y. (i cant get that level of detail -Trimmed D-Pad footprint -Removed speaker rail to allow variations for speaker size -Reinforced shoulder button mounts -Notched out a small area on the face-plate that was in the way of the LCD aligning correctly on the mounts -Added 6mm of Depth to the face-plate to be more forgiving of clearance with wiring.

Additionally, i used the Retropie image Jpete24 links to, while the drivers and system works, the rotation is upside down. With the SD card mounted on your PC find the file "config.txt" and edit it. Find this line and change the rotate from 270 to 90 "dtoverlay=pitft22,rotate=270,speed=80000000,fps=60"

Example

--- added by adafruit-pitft-helper Thu 17 Mar 17:11:08 UTC 2016 ---

[pi1]

device_tree=bcm2708-rpi-b-plus.dtb

[pi2]

device_tree=bcm2709-rpi-2-b.dtb

[all]

dtparam=spi=on

dtparam=i2c=off

dtparam=i2c_arm=off

#hdmi_force_hotplug=1

hdmi_cvt=320 240 60 1 0 0 0

hdmi_group=2

hdmi_mode=87

dtoverlay=pitft22,rotate=90,speed=80000000,fps=60

--- end adafruit-pitft-helper Thu 17 Mar 17:11:08 UTC 2016 ---

dtoverlay=hifiberry-dac