1. printing
2. sanding with sand paper
3. spraying with filler
4. wet sanding with sand paper
5. painting
6. bonding together, All parts I glued together with Z-POXY (resin glue)
7. varnishing

For better feel of the weight, is filled with gypsum

Printin time about 40 hours with 0.2 Weight about 1,5Kg Hight 366mm

Bottom stand: Infill 20%, No supports and next infill abouth 100g gypsum, Main stand: print whitout bottom and infill 5%, No supports and next infill abouth 900g gypsum Pin: infill 30%, No supports Ball: infill 30%, Yes supports Medail: infill 20% No supports Words: infill 100%, No supports