"Grid-Seven-System"

This is a collection of different parts that can be put together like you need it. All parts are designed to need only a small amount of print-material and to be strong at the same time. Also it looks really cool.

Printing: The maximum angles are 45° so I printed the Parts without support. Only on the grid_seven i used "touching buildplate"-Support, so that the top mounting holes came out straight. The structure itself needs no support if you have a well calibrated Printer.

• Nozzle: 0.4mm
• Layer: 0.2mm
• Material: In my case > BQ PLA (210°C)

Dimensions:

• All screwholediameters are 3,5mm.
• 40mm*40mm base
• Standard grid_seven is 157mm high
• Small grid_seven is 65mm high

Need in Addition: Beside the screws and your Print-Equipment nothing more is needed.

Example: I use this system to mount an LED-strip-light next to my printer and also a Microsoft-Webcam for Octopi.

UPDATE: 2016-11-10: Added a Spoolholder 2016-11-14: Added a stronger Corner-Bracket