This is a mount that allows a Raspberry Pi camera (v1 or v2) to be used in a telescope for astrophotography. The eyepiece will fit any 1.25" focuser. To use the Pi Camera for astrophotography you will need to remove the lens that covers the sensor, this can be done with a pair of long nosed pliers, carefully gripping the lens and rotating. YOU MUST GRIP THE CIRCULAR PART AND NOT THE SQUARE PART.

There are two files, one for the eyepiece that goes into the focuser and another for a cap that sits over the top, you will also need the following:

• 4off M3x12 Cap Head Bolts
• 4off M2x4 Cap Head Bolts

You may want to use a longer data cable that is available on the internet depending on how far away from your Pi you have the camera (mine is attached to the body of the telescope).