I designed this Qi-charging dock for a friend. He is currently using a Samsung Galaxy S7 and a Samsung Galaxy Gear 2 classic. Both can be charged wireless. I used a bare QI Charging circuit from ebay for it. It is designed to be printable on smaller printers, so I made seperate pieces for the backplate and the base plate. Print time is around 3-4 hours for all parts together. Had some warping, due to my heat bed. It broke last week and I could not fix it before printing these parts. I hope you like it!

Settings: Baseplate: PLA 10% Infill, 0.3 mm Backplate: PLA 10% Infill, 0.2 mm (Print with flat side down) Cover: PLA, 0.2 mm (clips onto the backplate and holds nicely)

QI-Charger: Ebay, Adafruit, etc. Smartphone: http://www.samsung.com/us/mobile/cell-phones/SM-G930UZKAXAA Watch: http://www.samsung.com/us/mobile/wearable-tech/SM-R7320ZKAXAR

Designed in Fusion 360, sliced with Slic3r and printed with Repetier-Host on my Geeetech G2S delta printer.