AnisopterH8

The Anisoptera Racer adapted to fly with the H8 Mini board.

It is expected to be the cheapest FPV nano racer platform capable of full acro! 40 to 50$ to build

V0.13: Modified led cutouts and increased lip. V0.12: Added 2mm to the wheelbase to give a bit more margin to the props V0.11: Corrected an error on the previous upgrade @ the arms connections + reinforcments. V0.10: Increased Bat height due to new boards with integrated bat plug V0.9_SUMO: Extra strong version for beginners following David's request V0.9: slight reinforcement of the bottom & added lip to prevent the battery from escaping V0.8: reinforcement @ the screws & 0.5mm height decrease V0.7: Suiss cheese version 3.40g V0.6: weight reduction & clean-up (flat bottom) 4.06g V0.5: Wire passage for flashing 5.76g V0.4: Clean-up & weight saving 5.83g - carbon:5.30g V0.3: Battery space enlarged V0.2: H8 board is now structural & there is a support for the camera V0.1: Initial design

Carbon loaded PLA filament was tested on V0.4, it is slightly lighter but it not handling shocks well & was rapidly destroyed.

Part list: Reuse an old H8 Mini -> Banggood: Eachine H8 Mini or H8 Mini board -> Banggood: Eachine H8 Mini main board Propeller/Helices -> Banggood: JJRC 1000 Props Motors/Moteurs -> Banggood: Hubsan H107C Motors or Amazon: Hubsan H107C Motors Batteries -> HobbyKing: 260mAh 35c 1s batt
All in one Cam -> Banggood: FX798T 5.8G 25mW 40CH Cam Banggood: Eachine TX01 5.8G 25mW 40CH Cam . You can as well assemble a camera system yourself for this you will need the following: Cam -> Banggood: CMOS 170Deg Cam AV-Transmit/Emmeteur Video -> Banggood: 25mW transmitter
Power module: Pololu 5V Step-Up Voltage Regulator U1V10F5 (Light) or Banggood: Maltek 5V step-up module (heavy) And finally a 33nf capacitor to be connected on the video power to filter the interferences from the engine.

For the remote control you can use the stock H8 remote but if you want more precision you can go with the Devo 7E which can be modded by the DdeviationTX firmware and the addition of a NRF24L01 to control the H8 as described in DroneGarageBlog Remote Control: Banggood: Devo 7E Mode2 NRF Module: Banggood: NRF24L01

Configuration: A webpage explaining the firmware flash of the H8 Mini: Drone garage Bolg

Made in Fablab Artilect: https://artilect.fr/dronelab/

https://www.youtube.com/watch?v=l1kkY5fqE6o https://www.youtube.com/watch?v=z-fZyy5z10c

Descrição