This Parametric Angle was inititally designed to reinforce a Prusa Mendel frame. However, it can be used and adapted for many other applications. It is fully parametric so you can change length, angle, thickness etc.

configuration.scad, metric.scad, functions.scad and teardrop.scad are taken and adapted from the Prusa Mendel. They are licenced under GPL.

You need 4-8 m3 bolts and 4-8 m3 nuts for the precompiled versions.

3 different precompiled versions are supplied. "Cylinder" and "Teardrop" are both cylindrical, but teardrop is easier to print. The "Cube" version is for rods with rectangular shape.

The source file is written in OpenScad http://en.wikibooks.org/wiki/OpenSCAD_User_Manual http://www.openscad.org/

If you want to create a different version, you will need to download all files ending with .scad and save them in the same directory, ensuring they are named properly. Then, simply open angle.scad and edit the parameters in the section "Local Settings". Hit Design->"Compile and Render" and Design->"Export as STL" and you're done.