Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Traction Engine por cabbageheart no Thingiverse

Descrição

Traction Engine Model for (optional radio control). This model was designed from the ground up with radio control in mind. It all goes together very nicely, but there are quite a lot of printed parts. Some hardware items will also be needed, see the assembly guide for more details. The driver figure and imitation coal are not included, I just added them to my model.

Why not show your friends and family what you and your printer can do. The part files have all been orientated ready for printing and should fit OK on just about any printer bed. I did not need to use support material for any of the parts using good quality PLA.
I have uploaded a video of this thing in action on YouTube https://youtu.be/hZ3H24cycfk There is also a travellers wagon to go with this model, http://www.thingiverse.com/thing:1801211 . Why not make some add on parts yourself and share them with us. Most importent of all HAVE FUN.

Thingiverse

Traction Engine

cabbageheart cabbageheart (abre em nova aba)
953
Curtidas
0
Downloads
1,103
Coleções
44
Impressões
Licença Creative Commons - Attribution - Non-Commercial
Arquivos (85)
Axle_Pivot_Pin_Retainer.stl 54 KB
Axle_Pivot_Pin.stl 41.1 KB
Boiler_Band.stl 301.3 KB
Boiler_Part_A.stl 326.9 KB
Boiler_Part_B.stl 102.4 KB
Bracket_Left.stl 52.2 KB
Bracket_Right.stl 52.2 KB
Brake_Lever.stl 81.2 KB
Cabin.stl 2 MB
Cam_Rod_Cap.stl 53.8 KB
Cam_Rod.stl 65 KB
Chain_Gripper.stl 141.7 KB
Chimney_Stack.stl 329.8 KB
Chimney_Top.stl 368.9 KB
Clutch_Fork.stl 85.1 KB
Clutch_Input_Gear.stl 235 KB
Clutch_Lever.stl 158.1 KB
Clutch_Output_Gear.stl 187.6 KB
Coal_Shovel.stl 543.1 KB
Crank_Rod_Cap.stl 51.4 KB
Crank_Rod.stl 59.8 KB
Crankshaft_Bearing_Block.stl 131.3 KB
Crankshaft_Part_A.stl 120.3 KB
Crankshaft_Part_B.stl 120.3 KB
Cylinder_Block.stl 550.3 KB
Cylinder_Head_Plate.stl 144.4 KB
Dog_Gear.stl 184.4 KB
Dog_Socket.stl 96 KB
Firebox_Front.stl 361.8 KB
Firewall.stl 51.4 KB
Fixed_Gear.stl 177.5 KB
Flywheel_Ring.stl 63.4 KB
Flywheel.stl 876.3 KB
Footplate.stl 466.1 KB
Frame_Top.stl 417.5 KB
Front_Axle_Beam.stl 133.1 KB
Front_Name_Plate.stl 301.2 KB
Front_Tyre_Option.stl 966.9 KB
Front_Wheel_Half.stl 129.8 KB
Front_Wheel_Rim.stl 61 KB
Hitch_Pin.stl 86.1 KB
Hub_Cap.stl 310.9 KB
Input_Gear_Spacer.stl 75.9 KB
Inspection_Hatch_Clamp.stl 96 KB
Internal_Bearing_Block.stl 107.9 KB
Left_Axle_Spacer.stl 59.8 KB
Link_Pin_Retainer.stl 54 KB
Linkage_Bracket.stl 282.7 KB
Main_Frame.stl 940.5 KB
Motor_Gear_Washer.stl 46.6 KB
Motor_Gear.stl 133.1 KB
Outlet_Pipes.stl 808.8 KB
Output_Gear_Spacer.stl 75.9 KB
Piston_Rod_Link_Pin.stl 40.5 KB
Piston_Rod.stl 37 KB
Pressure_Pipe.stl 532.7 KB
PTO_Pulley_Inner_Part.stl 80.7 KB
PTO_Pulley_Outer_Part.stl 86.6 KB
Rear_Flange.stl 368.2 KB
Rear_Tyre_Option.stl 319.2 KB
Rear_Wheel_Hub_Half.stl 175.1 KB
Rear_Wheel_Rim_Centre.stl 222.2 KB
Rear_Wheel_Side_Rim.stl 157.5 KB
Rear_Wheel_Spoke.stl 47.5 KB
Right_Axle_Spacer.stl 52.4 KB
Rod_Retainer.stl 47.7 KB
Servo_Tray.stl 40.3 KB
Shaft_Hole_Cover.stl 343.1 KB
Smoke_Box_Front.stl 509.1 KB
Smoke_Box_Handel.stl 72.3 KB
Smoke_Box.stl 328.8 KB
Steering_Gear.stl 205.6 KB
Steering_Post.stl 86.9 KB
Steering_Wheel.stl 655.8 KB
Top_Steering_Rod_Support.stl 56.7 KB
Trailer_Hitch.stl 338.6 KB
Tread_Rim_Left.stl 165.5 KB
Tread_Rim_Right.stl 165.9 KB
Valve_Control_Rod.stl 29 KB
Valve_Rod_Retainer.stl 54.4 KB
Wheel_Gear.stl 403 KB
Whistle_Block.stl 134.1 KB
Worm_Gear_Support.stl 44.4 KB
Worm_Gear.stl 157.5 KB
Pressure_Guage.stl 111.2 KB
Ver no Thingiverse (abre em nova aba)
Comparar agora