Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Loop Antenna por Branez no Thingiverse

Descrição

Loop antenna for reception of medium and short waves. The antenna is tuned by varicap diode BB510. Instead it can be used BB112 1SV149 or similar varicap diode with High capacitance. The entire frequency band is divided into three parts: 500 - 1800 kHz, 1800kHz - 7MHz, 6,8MHZ - 28MHz.The coils are wound with 45 X 0,04 Cu/S litaz. With this litz is reached a bigt Q factor.and good selectivity and directivity, so we can turn it in to the direction of a weaker signal for better reception of this and elemination of annoying stronger signal. The larger ring is made of a cover of a 10mm wide cable channel and here is wound18 turns with tap at 5. On a smaller ring is a 2 turns coil + 1 turn as link to receiver..

Thingiverse

Loop Antenna

106
Curtidas
0
Downloads
140
Coleções
Tags
antenna loop Loop Antenna loops receiver
Licença Creative Commons - Attribution
Arquivos (6)
Link_Coil_A.stl 144 KB
Nosilec_Antena1.stl 22.6 KB
Base_S.stl 279.1 KB
Nosilec_Antena.stl 54.2 KB
Base.stl 740.9 KB
Link_Coil_100.stl 624.6 KB
Ver no Thingiverse (abre em nova aba)