Bring plants or plant seeds into space!

This new Plant Space Rocket uses elements of "Voronoi LED toadstool tealight shade" by @funkshin (http://www.thingiverse.com/thing:1371598) and the "Flying saucer" from @gpvillamil (http://www.thingiverse.com/thing:10428/).

Good to know:

• Print the ring with wall and floor thickness 5. Glue the ring on the bottom part of the rocket. So you can easily open and close the rocket.

• At the top of the rocket, I melted a hole out.

Printed with PLA.

Update:

12.06.2016: Added "Plant-Space-Rocket-Unten_NEW_optimized.stl".

10.05.2016: Released two new versions. The "Mini Plant Space Rocket with Pot" https://www.thingiverse.com/thing:1548463 and the "Big Plant Space Rocket with Pot" https://www.thingiverse.com/thing:1548574.

22.04.2016: I made a small planting pot (Plant-Space-Rocket-4cm_Pot_NEW.stl), which can be used instead of the ring.

02.04.2016: I made a new Ring (Plant-Space-Rocket-Ring_NEW.stl). This should be easier to print. . 28.03.2016: I made a new rocket bottom part (Plant-Space-Rocket-Unten_NEW.stl). The printing will be cleaner and the three standing feet are much stronger.

------------------------

If you have no 3D-printer, you can buy a printed copy here: www.shapeways.com/product/NGKBY466W/

------------------------