Reprap - AtomX Micro Bot — STL Grátis

Added 2016-05-13

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// If you ask in comments or message me be patient as i started a new nightshift work that makes me pretty tired. Only so you know.....

Update 2016-05-08 ( Nr 7 )

Uploaded repetier beta firmware to be used.

This works with there browser based easy to use configuration tool.

I use the same sockets to power the board to power the fan that cools the hotend so its fool proof to avoid clogged nozzles because you forget.

https://www.repetier.com/

Always be carfull when using beta firmware like this!!!!

Update 2016-04-17 ( Nr 6 )

Uploaded the last part so its now final and there will simply be upgrades and fine adjustements to parts now only. the part is a z carriage extender and spacer.

Update 2016-04-16 ( Nr 5 )

Uploaded print cooler and my minimalistic addon to stiffen the z base a bit with longer threaded rods.

Update 2016-04-10 ( Nr 4 )

Uploaded new endstop holder designs.

Update 2016-04-07 ( Nr 3 )

Uploaded images so the ramps and lcd mount are more clear to put together.

Update 2016-03-28 ( Nr 2 )

Started uploading revision parts on things I have bin reported and requests. The x carriage have bin changed so you now nead 47-50mm long m3 screws to attach the motor. The original where done so you neaded to use a dremel to cut small bits of to fit the motor,it where done like that to make it easier to print. Rev2 parts do not nead this anymore!!!

If you already printed the old x carriage and don't want to cut it so is there a motor spacer if you don't want to print the new one and waste plastic.

Also made a small revision on the Bowden mount as some builders thought they neaded to sand and grind to much to fit there Bowden. I lowered the thicknes in this area with 0.25 mm so should work better.

Removed old x carriage as its obsolete and better with the new thicker one. It do not impact the suggested print size on y as we now have 200mm long rod on y as default. Keep suggestions coming but please post them here so its easier for me to track ;)