18 LED's arranged in HEX Shape! Ready to mount for the Velleman K8200 or 3Drag. You will need a 8mm LED Stripe 60cm (cuttable in 10cm pieces)

Print 6 x Hexa_Led
Print 2x Hexa_Clip (will clip into K8200 or 3Drag)
precut wires : 5 x 20mm & 5 x 25mm.

Solder the LED Stripes (8mm) with precutted wires.
insert the Stripe to the 6 holders.
clip the holders together. (you can melt the points)
insert 2 Clips into the Z-Axis Arm.
You can use Zip Tie to attach the Hexa LED.
Light it up!