Troublemaker v2 3D PRINTER

Troublemaker v2 3D printer is an improved version of Troublemaker, a derivative from the highly popular open-source 3D printer Ultimaker Original. A DIY friendly open-source release together with a complete kit of assembly parts, CAD files and technical documentation is available also on Github.

SPECIFICATIONS:

PRINTING SPECIFICATIONS Build volume (mm): 300 X 300 X 300 Auto levelling: Optional Minimal layer height (mm): 0.05 Steps/mm (X & Y): 80 HotEnd: 1 X E3D-V6 1.75 mm (swappable with any E3D) Travel speed (mm/s): 200 Print speed (mm/s): 150 Heated bed: Yes - 24V or 230V

MECHANICAL SPECIFICATIONS Desktop size (mm): 460 X 440 X 660 Frame: Plywood Linear rails: 8 mm ground hardened steel

ELECTRICAL SPECIFICATIONS Supply Voltage (V AC): 240 or 110 Supply connection: Switched and fused IEC Socket. Lead not provided. Power supply: 1 X 24V 100W / 1 X 24V 350W (if 24V bed) Electronics control board: RUMBA + LCD Motor drivers: 4 X DRV8825 (X,Y,Z,E) Motors: X: 46 Ncm 1.8° / Y: 46 Ncm 1.8° / Z: 46 Ncm 1.8°

SOFTWARE SPECIFICATIONS Recommended slicing software: CURA / Slic3r

BUILD TIME From full-kit: 12h

Descrição