I needed a small spotlight for something and realized I had some nice LEDs with GU5.3 socket, ment for 12 volt.

Hardware needed: 2x small screws for fixing the socket to the skirt thing, I used M3 with a small head. 1x M4x15 or equivalent as horizontal hinge. 1x M3x12 or equivalent as vertical hinge. 1x M3 nut for the above.

You'll of course also need a GU5.3 lamp and the socket itself.

I haven't tried this with halogen lamps and I wouldn't recommend it unless they are very low power(<10W) or you print it with a plastic that can withstand higher temperatures.

Check my youtube channel to see how it was made and how to assemble it! http://www.youtube.com/c/MrCrankyfaceProjects

Check me out at: Youtube: http://www.youtube.com/c/MrCrankyfaceProjects Instagram: https://www.instagram.com/mr.crankyface/ 3d hubs: https://www.3dhubs.com/malm%C3%B6/hubs/mrcrankyface Patreon: http://patreon.com/Mrcrankyface