more Tests in the new Test your 3D printer! version 3.

new features

• Z-Height Check
• Warp Check
• Spike
• Hole in wall
• Raft Test
• more Overhang Steps 50° - 70° (needs special care, like cooling)
• 2 different extrusion widths: 0.48mm & 0.4mm

This is a hard to print testfile!
often you don't know if your printer is ready for complex files. with this file you have an easy option to check problematic printing/slicing stuff.

does your printer challenge this ultimative part?
check it out and get (almost) instant results.

these test are included in this very tiny file:

• 01 Nut, Size M4 Nut should fit perfectly
• 02 Wave, rounded print
• 03 Star, Sharp Edges
• 04 Name, Complex Shapes
• 05 Holes, Size 3, 4, 5 mm
• 06 minimal Distance: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm
• 07 Z height: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1 mm
• 08 Wall Thickness: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7 mm
• 09 Bridge Print: 2, 4, 8, 16 mm
• 10 Sphere, Rounded Print 4.8mm height
• 11 Sphere Mix, 7 mm height
• 12 Pyramide, 7 mm height
• 13 Overhang: 25, 30, 35, 40, 45, 50, 55, 60, 65, 70°
• 14 Warp, does it bend?
• 15 3D Print Font, optimized for 3D printing
• 16 Surface, Flatness
• 17 Size, 100 x 100mm x 23.83 (10mm width)
• 18 Spike, minimum Layer Time, 21 mm height from Bottom (include Baseplate)
• 19 Hole in Wall, 4 mm diameter, check for proper print
• 20 Raft Test, raft should be just under the model
• 21 Retract Travel, check retract settings for longer travel

version 1 http://www.thingiverse.com/thing:704409 version 2 http://www.thingiverse.com/thing:1019228