Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Modelo 3D Beam Engine por cabbageheart no Thingiverse

Descrição

This is my working beam engine model. I will probably make another one using different colours.

If you like this kind of thing then have a look at my Traction Engine model.

Thingiverse

Beam Engine

cabbageheart

567

Curtidas

0

Downloads

638

Coleções

17

Impressões

Licença Creative Commons - Attribution - Non-Commercial

Arquivos (53)

Cam_Part_A.stl 93.2 KB

Crank_Pin.stl 23.7 KB

Crank_Gig.stl 2 KB

Cam_Part_B.stl 68.2 KB

Cam_Arm.stl 96 KB

Crank_Bearing_Block.stl 86.4 KB

Beam_Bearing_Block.stl 82.3 KB

Big_Pipe_Flange.stl 53.2 KB

Fork_Bolt.stl 17.5 KB

Control_Lever.stl 46.6 KB

Large_Nut.stl 22.3 KB

Base_B.stl 239.5 KB

Crank_Half.stl 78 KB

Floor_A.stl 101.2 KB

Linkage_Nut.stl 21.6 KB

Cylinder_Top.stl 74.3 KB

Linkage_Bolt.stl 14.7 KB

Long_Pipe_B.stl 37.7 KB

Long_Link.stl 75.4 KB

Long_Pipe_A.stl 47.4 KB

Floor_B.stl 33.7 KB

Base_A.stl 258.9 KB

Ladder_Part_A.stl 156.7 KB

Cladding_Part_A.stl 320 KB

Pillar_Base_Ring.stl 72 KB

Main_Cylinder.stl 97.6 KB

Pressure_Gauge.stl 59.2 KB

Piston.stl 87.8 KB

Ladder_Part_B.stl 79 KB

Piston_Rod.stl 208.1 KB

Side_Link_Socket.stl 56.1 KB

Short_Link.stl 69.4 KB

Pulley_Wheel.stl 109.5 KB

Valve_Control_Housing_Lower.stl 37.8 KB

Short_Pipe.stl 56.2 KB

Valve_Control_Shaft_Retainer.stl 60.4 KB

Pillar.stl 180.6 KB

Side_Link_Pinned.stl 38.9 KB

Large_Bolt.stl 28 KB

Optional_Flywheel_Spacer.stl 63.8 KB

Valve_Control_Shaft.stl 86.2 KB

Valve_Control_Housing_Upper.stl 182.1 KB

Small_Pipe_Flange.stl 52 KB

Flywheel_Half.stl 349.7 KB

Pivot_Plate.stl 48.3 KB

Retainer_Cup.stl 294.8 KB

Motor_Clamp.stl 62.2 KB

Fork_Arm_Plate.stl 63 KB

Beam_Half.stl 94.7 KB

Cladding_Part_B.stl 375 KB

Crank_Spacer.stl 57.1 KB

Crank_Rod.stl 259.1 KB

Screw_Cap.stl 150 KB

Ver no Thingiverse