This is a case for the Gadgets3D LCD SDcard controller.

You can use this on any 3D printer. On the back there are inserts for some hooks. The hook has a 7mm gap for 6mm plywood or some thing else to hang it on.

I designed it for my self sourced Ultimaker.

Print it with a 0.8mm wall thickness. Infill of 20%. Speed and layer height what you want. For the best result a 0.1mm layer height is re-commanded.

Make sure that the top front face and bottom back face is laid down on the bed. So you don't have overhangs.

If you printed it search some thin 2mm screws with a head of +/- 4mm. Minimal length 10mm.

Place the LCD controller on the top part. Place the bottom part on the top part en insert the screws.
That's all.