Some scripts I like to use with my TOM Gen4 Interface, from the SD card

Contents: GCODE Folder: Original gcode S3G-TOM: Build files for my SD

Script folder Some scripts from http://www.thingiverse.com/thing:11186 S_NozzleS_HBP-Max.gcode: Turn Nozzle and HBP to max temperature 225 and 125 ºC S_Release.gcode: Release motors to move with hand S_Calibrate.gcode: First run release, place nozzle centered on the build platform then run this script to save the coordinates S_Extrude-10s.gcode: Heat nozzle to 225 ºC and extrude 10 seconds S_Extrude-50s.gcode: Heat nozzle to 225 ºC and extrude 50 seconds S_Extrude-Rev-10s.gcode: Heat nozzle to 225 ºC and extrude 10 seconds in reverse S_Extrude-Test.gcode: Heat nozzle to 225 ºC and extrude 10 seconds forward and reverse in a quick small loop (to test the pressure on the filament) S_Inicial.gcode: Move motors to calibrated 0,0,0 S_Min.gcode: Move motors to upper Z, bottom Y and right X (each endstop) S_Nozzle-0.gcode: Turn off the nozzle heater S_Nozzle-225.gcode: Turn Nozzle to max temperature 225 S_NozzleS_HBP-0.gcode: Turn off Nozzle and HBP heater

Partymode folder Scripts from http://www.thingiverse.com/thing:6964 and http://wiki.makerbot.com/makerbot-music M_whereisviolin.gcode M_Zelda.gcode M_BachInvention.gcode M_Bolero.gcode M_gameanthem_xy.gcode M_Imperial_march.gcode M_Lullaby.gcode M_MakerBotMStamper.gcode M_oneturndeservesanother.gcode M_openviolin_microprint.gcode M_PartyLikeACube.gcode M_snakeydance.gcode M_Still_Alive.gcode M_stirringtheair.gcode M_Tetris.gcode M_triangleman.gcode

S3G-TOM folder files: Copy to the root of your TOM sd GCODE folder files: Load them in ReplicatorG and click Build to File (save them in the sd)