Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Transformer Tardis por nonnef no Thingiverse

Descrição

Made this Soundwave Tardis Transformer for an Instuctable contest, and thought I'd post it up here as well.

Old design; no longer supported. Leaving files up for posterity.

Instruções

Detailed build instructions and transforming process can be found on the Instructables page: http://www.instructables.com/id/Tardis-Transformer-Pick-your-flavor/

7/10/13 update:
Added door details, changed the neck transformation back to the Mark1, completely redid the ankles and feet, and tweaked a few dimensions of the joints.

Printed with a .35mm nozzle at .25mm hieght. Keep support on and a 6mm raft.
You'll need one of everything with two exceptions: 8 windows, and 2 outer back support.
Joint holes are 2.5mm. I used 1.78mm nylon filament, but you should be able to drill them out to 3mm if you need to.

Everything is snap fit, but the tolerances are super tight so a bit of shaving may be required. If you take too much off, or if your joints are lose, hit it with a coat of lacquer paint until it's nice and tight.

Thingiverse

Transformer Tardis

nonnef nonnef (abre em nova aba)
789
Curtidas
0
Downloads
866
Coleções
4
Impressões
Tags
Action Figure soundwave tardis toy transformer transformers
Licença Creative Commons - Attribution - Non-Commercial
Arquivos (47)
legs_left_knee.STL 32.8 KB
legs_left_foot.STL 116.3 KB
legs_right__knee.STL 32.8 KB
legs_left_tardis_cover_rear.STL 83.5 KB
legs_right_tardis_cover_front.STL 64.9 KB
legs_right_foot.STL 116.5 KB
torso_backbrace_inner.STL 27.8 KB
torso_backbrace_outer.STL 27.6 KB
legs_right_tardis_cover_rear.STL 83.5 KB
legs_left_tardis_cover_front.STL 64.9 KB
torso_tardis_back.STL 77.1 KB
torso_tardis_right_lower_back_side.STL 31 KB
torso_tardis_chest.STL 178.3 KB
torso_tardis_left_lower_back_side.STL 31 KB
arms_left_elbow.STL 19.6 KB
torso_lower_midhips.STL 155.5 KB
tardis_lantern.STL 286.8 KB
arms_right_elbow.STL 19.6 KB
arms_left_fist.STL 91.2 KB
torso_tardis_left_upper_arm_side.STL 139.4 KB
arms_right_fingers.STL 24.2 KB
torso_tardis_top.STL 42.4 KB
arms_left_lower_shoulder.STL 32.3 KB
arms_left_fingers.STL 24.2 KB
gun_handle.STL 16.4 KB
arms_right_lower_shoulder.STL 32.3 KB
arms_left_upper_shoulder.STL 91.6 KB
arms_right_fist.STL 91.2 KB
torso_tardis_right_upper_arm_side.STL 139.4 KB
head_soundwave_front.STL 97.5 KB
head_soundwave_back.STL 40.1 KB
cannon.STL 127.5 KB
arms_right_upper_shoulder.STL 91.6 KB
legs_left_upper_calf.STL 23.9 KB
legs_left_lower_calf.STL 26.9 KB
legs_left_hip.STL 92.5 KB
arms_left_forearm.STL 149 KB
legs_left_ankle.STL 83.4 KB
legs_right_lower_calf.STL 26.9 KB
legs_right_upper_calf.STL 23.9 KB
legs_right_ankle.STL 83.4 KB
tardis_windows.STL 11.8 KB
legs_right_hip.STL 92.5 KB
torso_neck_insert.STL 19.2 KB
arms_right_forearm.STL 149 KB
torso_upper_midhips.STL 70.4 KB
torso_neck.STL 145.4 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora