This is another Version of an enclosure for the Raspberry Pi official 7" touchscreen. By inverting the pi and rotating it 180 degrees, the USB/Ethernet ports barely stick out of the case for easy access! This model was based off the Version made by deisterhold, although I built this design from scratch, using the dimensions of his bottom mount design.

UPDATE 4/14/2016* VERSION 2 -After learning how to use SolidWorks, I decided to redo my touchscreen case so that the parts all work together! -The old version has been consolidated into a ZIP file called "OldRaspberryPi Case" -I have a ZIP file of the New Solidworks files in "pack and go" format called "Pi Touchscreen 2016" -The STL's with "NewTouchscreen Case" are the updated version. FIXES: -the slot now fits the USB port perfectly -Holes now match up -there is now a border to protect the edge of the touchscreen

This is designed with an external USB Battery in mind, with a small slot for the microUSB cable to fit into.

I made 2 versions of the mounting plate, a plain one and a plate with the Raspberry Pi logo. (I also made one that has my name engraved on it, but y'all don't need that version!)

I will post pics and more details once I start putting it together!

UPDATE 10/14/2015 Thanks to SkyRider, I found that the screw holes did not line up with the case. It has since been fixed, so be sure to print the BottomNew.STL file instead!

UPDATE 10/16/2015 I did a test print of the BottomNew.STL and I need to do some work on it as far as thickness is concerned. I have made another file that should work instead. This is Bottom3.STL

UPDATE 10/17/2015 The parts came in the mail, so I was now able to put them together. First off, I found some long machine screws to find that the holes in the print were too small! I improvised by taking an 1/8" drill bit and redrilling the holes. I then cut the machine screws to length and screwed the enclosure together, completing the project!