Created an action camera mount for my Sony action cam.

Things you need to purchase:

1. One: 3/4" PVC SCH-40 pipe. Mine had a 1.055" OD and 0.80" ID
2. Four: 1/4-20 x 2.5" hex bolts
3. Four: 1/4-20 nuts
4. Swivel camera head. Mine happen to come with M4 thread to mount so i bought a M4x20 hex bolt to thread it on.

The "Flat Bracket" and the "Inside Washer" need holes drilled in them afterwards for the threaded portion of the screw. Didn't have a good way to get those holes in there without supports.

Most of the STL's will probably have to be flipped around before printing. Just use your wisdom for orientation :P

Bolts and nuts press fit into the parts. Oh, and the posts for my headrest measured 14mm in diameter. Other than that, just drill holes where necessary, mount, and go!

https://www.youtube.com/watch?v=y16krU1lUCQ

**Update: created another way to hold a Sony Action Cam http://www.thingiverse.com/thing:1320725