Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is a multi-platform (mac, windows, linux) application that generates a small glue-less shelf that can be hung on an existing shelf or table, based the parameters written on a text file. The generated SVG file can be used to build the shelf with acrylic or MDF with a laser cutter. The executables, the Processing sketch source code and an example SVG are attached to this Thing.
Instruções
1 - Open the appropriate executable for your operative system or open the source in Processing and run the sketch;
1.5 - In case you choose to run the Processing sketch, you need to copy the two libraries attached to the Processing libraries folder;
2 - Open parameters.properties in your text editor. if you're running through Processing, the file is inside the data folder;
3 - You can make changes in the parameters file and see the changes in real-time each time you save the file;
4 - That's it! When you're happy with the results, just close the application and use the SVG file in the "data" folder to build your new extra shelf.
You can customize pretty much everything. Below is an example of the parameters.properties file:
you can make changes on this file on real-time
just open the appropriate application and watch it change
when you save this file
these shelf dimensions are the exterior dimensions.
shelfHeight = 120 shelfWidth = 110 shelfDepth = 120
usable dimensions are given by the following formulas:
usable Height = shelfHeight - boardThickness * 2
usable Width = shelfWidth
usable Depth = shelfDepth - boardThickness * 4
this is very important to set up correctly
as the size of the gaps depend on the board thickness
boardThickness = 3
this will be the thickness of the shelf(or table or whatever)
that this shelf with be hooked into
shelfGapHeight = 19 hookHeight = 10 hookLength = 80
numberOfBottomTeeth = 5 numberOfSideTeeth = 4 numberOfBackTeeth = 4
the front plate helps items from falling off the shelf
includeFrontPlate = true frontPlateHeight = 30 numberOfFrontTeeth = 1
you may add a margin between pieces
drawingMargin = 0
