BEEFED UP THE CLIPS AND WIDENED THE CLIP GAP SO NOW THEY DON'T BREAK.

I made this cable tidy and printed labels for Computer ,Screen ,
Printer and Speakers as when ever I work on my Pc or need to use a socket without accidently shutting down my Pc it is handy to know what sockets I can use. This should be printed in ABS as ABS
flexes better when inserting the cables. If you do decide to print this with PLA I would recommend increasing the size by at least 10% to prevent the clips from breaking. I also recommend printing 2 of them to allow the clips to cool off before the next layer as I found printing one on its own the clips warped. Slowing print speed down would solve that problem but as I am new to printing I just printed 2 of
them

For best results, Print in ABS as it flexes best to allow cables to be
pushed in.

If you do print in PLA then increase the size at least 10% so the clips aren't too stressed pushing in the cables.

Printing 2 side by side will give the clips time to go rigid and hold
their shape. You could also just print 1 at a slower speed.

Use small screws to attatch to your skirting boards or desk or where
ever it is you need to use it