This is a RC Avatar Gunship with a FPV camera.
It'a powered by a 2800 mAh Lipo battery and I used a Spektrum control system. The camera is po750 mAh Lipo battery.
For more fun you need the HobbyKing KK 2.1.5 Multiboard and two 10kg Digital Servos.
It is a prototype and I'm still improving it.

Up to now I haven't found the right adjustments on the Multiboard so that the Gunship is too shaky.
Here is the video link:
https://youtu.be/ypMPR_iwktY

Print everything once, except (You may have to sand and drill some parts):

• Seitenruder
• Motorhalterung
• Servo Hebel
• Kuve 1
• Kuve 2

You also need:

• Two “Hacker A30-12M Brushless Motor”
• Two ESCs “Xetronic 50A”
• One 2800 mAh Lipo battery
• Two "HXT 10kg Servo (metal gear) 55g / 10kg" (HobbyKing)
• One KK2.1.5 HobbyKing Multiboard
• Four bearings (Outer diameter: 22mm; Inner diameter: 10mm)
• aluminum bar (at least 50 cm long; Diameter 10mm)
• Alot of M3 screws (30mm long) and self-locking screw nuts (Sometimes you can use shorter screws)
• Eight M4 screws (40mm long) and self-locking screw nuts (They are on Top of the Gunship for the Servo1 and Servo 2)
• One Kamera with live broadcast and a 750mAh Lipo battery
• Two Three-Blade Propeller (9x7)

Don't hesitate to ask if you have any further questions!