Ignite your imagination with a set of dinosaur fossil magnets to use around the home.

These magnets feature dinosaurs such as the T-Rex, Stegosaurus, Spinosaurus, plesiosaurus, pterodactyl, brachiosaurus, triceratops, and a Parasaurolophus.

We used Sunlu Lilac and White to do this and did print this with a .4mm nozzle but there is a .2mm nozzle option to get the best quality out of your print.

This is made with PLA and uses a rare earth magnets that we found here → [https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html](https://www.harborfreight.com/10-piece-rare-earth-magnets-67488.html)

The spots for the magnets is 8.3mm x 2.85mm deep. I used a dab of glue to hold the magnets in place as they are strong and will pop out of the item if you do not.

You can also use flat magnetic sheets but the hold isn't as strong. If you are not holding items behind the dinosaurs then a flat magnet will suffice.

NOTE

Do not size down or up if you are using the same magnets that I have featured in the listing.

For a Bambu Labs ready file please see my makerworld listing here → [https://makerworld.com/en/models/583997#profileId-505177](https://makerworld.com/en/models/583997#profileId-505177)