The original design was great but it was far to small. Made the model parametric in height and width so you can easily make the adjustments you need to fit your space. 

Follow the same print instructions as the original (they say no supports but the little tabs in the back of the stand itself need support if you want it to print perfectly)

I only uploaded the F3d files so if you're looking to actually print this you will need to pull it into fusion360 and then export the mesh

To make changes to the file in fusion its also extremely easy. Simply open the file in fusion, navigate to the center and select the modify option. Scroll down and press “change parameters”

The shortest/widest you can make this model is 0.5mm larger than the original. If you attempt to make the model any smaller than 0.5mm it will throw an error ( I did not want anyone to be able to print the original model using my files. To print the original model you will need to download it from the original creator) The F3d file provided is 50mm taller and 50mm wider. 

Hope this was helpful to someone. 

Happy printing~