Fidget Controller !

Recently seen a video of some fidget controller can be found at Nintendo store in Japan, so i try to make my own version.

I took me some time to found the good design and try to make it work (that my first multipart design in Fusion 360).

There is 2 version, with or without hole for a keychain.

All the part is support free and only require a rubber band to work. 

Print Setting :

Backplate :

Print at 0.12 layer height and slow speed at the top

Case :

Print face down, 0.12 layer height, 2 perimeter and linear pattern on bottom for better result.

Button :

Print with a brim, 0.12 layer height and concentric pattern on the top.

The tolerance is tight fit to the case so u can print one to test and rescale it for a better fit (mine work better at 95%)

Assembly :

Just place the rubber band on the backplate and secure it with one button, do the same with the other one and place the case one it, if it not enter juste gently move the button and that it !

Hope u like it :) 

if u have any problem or suggestion please tell me.

I will try to make more version in the future.

(If u enjoy my design u can like, follow and tip me)