Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
- Made an addition - crude fuse wrench.
- Shell fuse 2 and shell top fuse 2 have not been printed.
- Shell fuse 1 and shell top fuse 1 have been printed and fits tight if it's too tight the method i use is to dip it in boiling water for a minute or two and quickly threading it in and backing it out, repeat till threads are fully seated
- Fuse wrench is useful if it gets stuck and can tighten it to make it almost impossible to open by hand without damaging it
- Fuse set 2 and fuse set 1 are not interchangeable
- This is my first remix and may not be perfect
3
Curtidas
57
Downloads
Categoria
Props
Licença
Creative Commons — Attribution — Noncommercial
Arquivos (12)
shell fuse 1.3mf
665.4 KB
shell top fuse 1.3mf
519.6 KB
shell top fuse 2.3mf
1.4 MB
shell fuse 2.3mf
876.2 KB
shell-top pin fix.3mf
565.5 KB
fuse wrench.3mf
162.5 KB
shell fuse 1.stl
2.4 MB
shell top fuse 1.stl
1.7 MB
shell fuse 2.stl
3.1 MB
shell top fuse 2.stl
4.8 MB
shell-top pin fix.stl
1.8 MB
fuse wrench.stl
544.6 KB
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta