Ir para conteúdo
3DFinder
Iniciar sesión

Estás en 3DFinder

Buscamos en Thingiverse, MakerWorld y Printables al mismo tiempo para darte lo mejor de cada una.

Buscar más como este
Modelo 3D Parametric drill depth stop por ksuszka en Printables

Descripción

I don't like drill stop designs where a screw touches the drill bit, as they tend to skew on the drill bit, especially on drill bits with thin blades, like wood drill bits. With this design, the whole inner surface of the drill stop holds the drill bit.

To assembly it, you need an M3 washer, M3 nut and M3 screw, 12mm length (it may be a little bit shorter for smaller drill diameters). The nut should be a very tight fit to prevent turning.

A tip for an easy insertion of the nut:

  • insert a long M3 screw (at least 20mm) through the screw hole
  • put the nut on this screw and screw it till the nut is in the position
  • gently unscrew the long screw leaving the nut in the place
  • put the washer and the final screw

Print Settings

Rafts: 

No

Supports:

Yes

Resolution: 

.2

Infill:

100%

Printables

Parametric drill depth stop

ksuszka ksuszka (abre en nueva pestaña)

Publicado el 16 de oct. de 2023

114
Me gusta
907
Descargas
16
Impresiones
Categoría Tools
Etiquetas
tool drill openscad drilling thingiverse drillguide drillstop
Licencia Creative Commons — Attribution
Archivos (26)
drill_stop_metric_11.stl 297.2 KB
drill_stop_metric_7.stl 262.7 KB
drill_stop_metric_8.stl 468.4 KB
drill_stop_imperial_5_32.stl 497.3 KB
drill_stop_metric_9.stl 407.1 KB
drill_stop_metric_12.stl 357.8 KB
drill_stop_imperial_1_4.stl 282.3 KB
drill_stop_imperial_1_8.stl 424.7 KB
drill_stop_imperial_7_16.stl 435.3 KB
drill_stop_imperial_3_8.stl 566 KB
drill_stop_imperial_7_32.stl 433.9 KB
drill_stop_metric_3.5.stl 449.1 KB
drill_stop_imperial_5_16.stl 506.2 KB
drill_stop_metric_4.stl 245 KB
drill_stop_metric_3.stl 361.4 KB
drill_stop_metric_10.stl 435 KB
drill_stop_imperial_1_2.stl 345.8 KB
drill_stop_metric_5.stl 321.4 KB
drill_stop_metric_6.stl 399.1 KB
drill_stop_metric_set.stl 4.2 MB
drill_stop_imperial_set.stl 3.9 MB
drill_stop_imperial_9_16.stl 161.8 KB
drill_stop_imperial_3_16.stl 523.9 KB
drill_stop_metric_4.5.stl 331 KB
drill_stop_no_customizer.scad 3.2 KB
drill_stop.scad 4.7 KB
Ver en Printables (abre en nueva pestaña)

¿Te gusta este modelo? Crea una cuenta gratis para guardar tus favoritos y volver a ellos más tarde.

Crear cuenta
Comparar ahora