I had an extra Hue Dimmer Switch. Because my grandson enjoys turning lights on and off, I modeled a case for the switch. Now he can control a single lamp as he likes.

Here's what you need for that:

• 2 nuts M3
• 2 screws M3x12

Printing information

All STL files are correctly aligned.

Layer height: 0.20
Perimeter: 3
Infill: 10%
Support: none

To insert the two nuts into the case during printing, define a print pause at layer #106 (21.20mm) in the slicer.

Finally, glue the lid onto the case. It's best to do this before you insert the Hue Dimmer Switch to avoid accidentally gluing it in place.
 

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.