A simple 3D printed CNC touch probe. This is part of my g0704 CNC mill conversion: [https://www.nathantsoi.com/blog/from-3d-printing-to-machining-metal-parts/index.html#probing](https://www.nathantsoi.com/blog/from-3d-printing-to-machining-metal-parts/index.html#probing)

It functions as a normally closed switch. When the probe contacts material in any direction, it breaks this connection and the switch opens.

Printing:

I printed this in PETG (https://amzn.to/38AbG5Y), but ABS or PLA should be fine as well.

Required Hardware:

• 6x 8mm steel balls: [https://amzn.to/3lxxwva](https://amzn.to/3lxxwva)
• 5mm diameter x 50mm steel rod
• 8mm diameter x ~6mm rod for the probe end
• 8mm diameter x ~50mm (I used steel) rod for the probe shaft (to mount inside the collet). I turned down a 1/2" steel rod, so I could use a 1/2" collet
• 10mm diameter spring

Category: Machine Tools

If you find this useful, consider buying me a ko-fi: [https://ko-fi.com/natester](https://ko-fi.com/natester)