This is a remix of Perinski's design. [https://makerworld.com/en/models/549604#profileId-467957](https://makerworld.com/en/models/549604#profileId-467957)

Changes I made are adding Gridfninty 5x5 Base.  Pins may need a punch and hammer to lightly insert.  No need for wires or screws.  This can all be printed.  

You will need to print 4 pins and 2 latches per box.  Lid also needs 4 pins and 2 latches.

Printed on Bambu Labs X1C with default 0.20 standard settings

Filament Bambu PLA Basic.  I chose basic as it is what I had lots of on hand.  

Gridfinity Base uses 6x2mm round magnets.  I did not install with any superglue.