This is a case for the all new Nerdaxe by @Bitmaker. It aligns the active Display Area with the fan to give a more convenient look. You have to use two additional 12 pin stackable female socket strips in order to jack up the display to fit the front of the case. Also unscrew the fan from the heat sink and use four 5x10mm fan screws to mount the fan to the case instead. You might use the screws which come with the Noctua fan.

Here is a list of additional material needed:

• Nerdaxe board
• Noctua A4x10 (40x10) 5V PWM fan
• 4 fan screws 5x10mm
• 8 melt insert nuts (M3, D5)
• 4 longer screws M3 to assemble the case
• 4 short crews M3 to mount the Nerdaxe board

Printed with PLA on a Creality K1C.