I have a few SLR and DSLR camera bodies that are not used frequently or that are retired.
Instead of keeping them in storage or on a shelf I wanted to mount them to the wall. Mostly because they hold sentimental value.

Made a mount that is connected to the camera with a 1/4 inch screw and uses two 2.5mm screws to mount them to the wall.

It was designed for the body only, but a small lens attached to the body should be ok.

Update 23/07/2024:
The ¼ inch screws that I ordered were a little bit long. So I added a thicker 5mm version.