Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 114.67x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Earth Brown
At layer #12 (1.04mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #22 (1.84mm) swap to Jade White for the rest.