PC stand create for Erying motherboard 180x244mm. 

Brass hot Melt Insert Nut -M3, lenght 4mm, OD 4.5mm _ 21 pcs

For motherboard M3x6+6 _ 6 pcs 

My setup:  

Erying motherboard with intel i9 - 11980HK _ 1 pcs

Fan 120mm _ 2pcs

Standart SSD 2.5' without case _ 2pcs

Card Reader En-Labs from aliexpress _ 1pcs

3.5 Inch IPS Type C Secondary Screen for Computer from aliexpress _ 1pcs

MSI 4060 VENTUS 2X BLACK 8G OC _ 1pcs

Standart PC computer switch _ 1pcs

PSU Metalfish flex 500wt form aliexpress_ 1pcs

Prtin setup: PETG, 5 walls, 5 bottom, 5 top, 20% infill gyroid 

Printing without support with bridges (Be Carefully! You need to know how print with bridges)

You can combine the model as you wish. The archive contains details for design variations. If u dont need place for standart SSD 2.5' or Card Reader just cut out these areas with a primitive in slicer.