Hello Everyone

I designed a guide for the cable coming out of the X axis. Thanks to this small modification, the cable does not kink and when using my other two projects "Bambu Lab A1 Series - Toolhead Cable Guide" and “Bambu Lab A1 Series - PTFE & Cable Clip” that create a complete cable guide system. Thanks to which the soft silicone cable does not hang limply and does not get tangled in the Z axis when printing larger elements. Below you will find links to these projects.

When you complete the project, please share a photo and a comment. Thank you and have a nice day.
 

Here you will find all my modifications and accessories for Bambu Lab A1 Series printers : [https://www.printables.com/pl/@Damian27/collections/1547024](https://www.printables.com/pl/@Damian27/collections/1547024)

For all modifications of my Bambu Lab A1-Mini printers, I used Fiberlogy Easy PLA and Fiberlogy Impact PLA filaments in Gray and Graphite colors. As you can see in the photos, the color is almost 100% consistent with the color of the printer, which makes the modifications look like factory parts.

How to Print ? :

• Material : ANY
• Layer Height : 0.2mm
• Infill : 100%
• Wall Loops : 3
• Bottom Layers : 4
• Top Layers : 4
• Support : No 
• Brim : No