Tips for printing:

• Supports: Yes = CutePenguin_3 / No = CutePenguin_1_2
• Layer height: 0.16mm (optimal)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: Arachne !!!
• Detect thin walls: -
• Brim: Yes

Colors and filament I used (3 Color Version):

• PLA / White - for the face and eyes
• PLA / Black - for the body and eyes
• PLA / Orange - for the feet and beak

Or decide for yourself which colors and how many you want to use!

When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

Here is another important tip for printing in multicolor: All penguins (1 + 2 + 3) must be printed in Arachne! Not in Classic! (Wall generator). So that the lines are printed in the middle, equal and look better! (See picture below!)