Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
With this model there is a blank plate and you can be creative in the slicer by adding additional file. Set additions at 0.4-0.6 above(positive) or below(negative cut) the plate for a color swap. Please NOTE to allow for the blank to slide into the base. Look forward to see what you create.
Base - Prints vertically 4 t/b/w 12 - 15% infill.
Sign - Prints your preference 4 t/b/w 15% infill
You can color swap sign to get different effects
Remix only allowed of sign part. Included STEP file.
Remember that your total lettering/ad needs to be no larger than 45-50mm tall and 78mm wide with a depth of 1mm, centered on the blank sign
Will add more State signs as time permits. Use other files to build signs on the blank.
If you are printing for the Community Print Drive, be sure to use the appropriate guidelines:
2024 Christmas Community Print Drive Printing Guidelines
BillBoard (Approved Scale)
Publicado em 28 de out de 2024
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta