An articulated elephant with a total of 24 joints that prints in place without adding supports. 
No assembly required except for the removal of the 3 supports included in the model (for tail and ears).
About 25cm in length depending on how you measure.
Not necessarily anatomically correct, but robust and very fun to play with.
The complex shape of the first layer requires good bed adhesion, so clean your plate and consider adding a brim.

If you printed the model and liked the result, Please consider giving the model a like. It really helps.

The joints are relatively loose, and if you want it to stand more securely, please have a look at this excellent stand made by mhparsons.

Elephant Stand by mhparsons | Download free STL model | Printables.com

I have successfully scaled down and printed the model at 70% which probably is close to the limit as the tail becomes quite weak.

Please have a look at v2 of this model, including Tusks

Articulated Elephant (with Tusks) by kida | Download free STL model | Printables.com

If you want a smaller elephant, have a look at my Tiny version

Tiny Elephant (Print-in-Place) by kida | Download free STL model | Printables.com

This elephant is the second in my series of articulated animals. Please have a look at the others if you have not seen them already 

(Articulated Giraffe (Print-in-place) by kida | Download free STL model | Printables.com)
 

Articulated Bear by kida | Download free STL model | Printables.com

Tiny Giraffe (Print-in-Place) by kida | Download free STL model | Printables.com

(Articulated Kangaroo by kida | Download free STL model | Printables.com)

If you enjoy this model, please like and/or upload a photo.

Enjoy!