This was modeled specifically for the glass container I had with this rose on, but it can be scaled as desired, and even split in any height in case you need a shorter version of it.

I didn't print it in vase mode because I wanted thicker walls (these are 2.5 mm thick) but you should be able to also do it in vase mode as well, it will print faster and use less material, but be more fragile.

Model is 154 mm tall, 62.5 mm diameter, with the inner hole being 57.5 mm. 

I printed this on White Silk PLA, it took 3:30 hours in K1, 0.2 mm height, no supports needed. It took about 78 grams of filament.